Optical Equipment

Gigabit Fiber Lan Card

Gigabit LAN Card

FHC-7000 series Optical Gigabit Ethernet adapter is designed to operate at 1000Mbps at full duplex. FHC-7000 series supports IEEE 802.1p Traffic Prioritization for time-sensitive and mission-critical traffic. With IEEE 802.1Q multiple VLAN support, it provides VLAN tables that can filter packets by recognized VLAN tags.

Product Datasheet
Resources (firmware, documents etc...)


  • Hardware VLAN filtering
  • Chip-Level Internet Protocol (CLIP) for IP packet processing
  • IEEE 802.3z compliant
  • Comply with the PCI v2.2 interface standard – supporting operation at 33/66 MHz and 32/64 bit wide data path
  • Full duplex or half-duplex operation
  • On-board verification of IP header and TCP/UDP checksum
  • On-board screening of VLAN-tagged packets – tagged in compliance IEEE 802.3ac
  • IEEE 802.3z 1000Base-SX,1000Base-LX Gigabit Ethernet compliant
  • Standard optical fiber connector and cable type options
  • Transceiver lasers compliant with Laser AEL Class 1 standards and is safe for eye-viewing
  • Plug and Play installation
  • Two LED indicators: Link/RxAct, Power/TxAct
  • Drivers for all leading Network Operating Systems,Support for: Windows XP; Windows 2000; Windows 95 OSR2, 98, 98 SE; Windows NT 4.0; Windows ME; Novell Netware Server 4.x, 5.x , 6; Novell Netware Client32 for DOS; Linux (kernel 2.4.x)


Network Type Optical Ethernet 1000Base-SX/1000Base-LX
Single fiber / dual wavelength 1310 / 1550nm maximum reaching 20km
Dual fiber / single wavelength 1310nm or 1550nm maximum reaching 80km
Host interface PCI 2.1 Bus (Bus Master)
Physical Dimensions 165 mm x 66 cm
Power Consumption 5 Watts max
Storage Temperature -25°C~ 55°C
Operating Temperature -5°C~ 50°C
Humidity 5% to 95% non-condensing